We knit double mittens for children. Photo master class. Double knitting mittens for a child - knitting pattern and description How to knit mittens with double knitting

They keep hands warm much better due to the additional air layer. And such mittens will take longer to get wet than regular ones. And having learned how to knit classic mittens with a comfortable wedge for the thumb, you can add patterns and embroidery. According to our master class, you can knit both double and single mittens. We will show you the principle of knitting, and then your imagination will tell you. Let's get started!

To work you will need:

106g of Moscow Lana Sonata yarn (50% wool - 50% acrylic; 250m - 100g);
Circular knitting needles 80cm size 2.5mm (for elastic) x 2 pieces;
Double needles size 3.0mm (main);
2 markers;
Scissors and needle.

Video master class on knitting mittens:

Description of the process of knitting double mittens with knitting needles:

In order to understand how many loops you need to cast on first, knit the sample in a circle using stockinette stitch and make the necessary calculations. Then measure the volume of your hand; to do this, wrap a centimeter around the part of your palm that is located above the thumb (without the thumb itself). We knitted for a hand volume of 19cm (slightly loose).

And here are the green ones from the video lesson.

Instructions

Start knitting the regular (top) stitch for the left hand. To do this, you need to cast on the required number of stitches, dividing them equally for each of the four double needles. Select the size of the future double individually. The easiest way to refine it is to knit several rows with an elastic band and pull the unfinished sample onto your palm.

Having specified the size of the double mitten, knit an elastic band 1x1 (one front and one back) or 2x2 (two front and two back) about seven centimeters in height. Next, perform the first circular row with knit stitches in stockinette stitch); in this case, it is necessary to add one loop on each working needle.

Tie the circular fabric to the beginning of the thumb and remove several open loops, threading them onto a pin. Also measure the required hole size for subsequent fingering individually, calculating the knitting density.

Next, you need to tie the mitten to the level of your index finger and turn the unknitted product inside out. Now pick up stitches along the edges of the elastic band of the outer mitten to work on the inner lining piece. To do this, thread a thread from the edge of the work, tie it in a knot and pull out the loops, stringing them onto working needles.

Perform the mitten-“”. After finishing the work, also on the tip of your index finger, close the toe of the product. To do this, you need to remove each last loop of the circular row onto the next working needle and knit it together with the next loop. As a result, you should have one loop on your knitting needles (four in total).

Pull the thread through the remaining open loops and pull it tight. Using a hook, the thread must be pulled to the wrong side of the work. Finish knitting the top of the front mitten in the same way.

Next you need to tie your thumb on one and then repeat on the other mitten. Make sure that the inner and outer fingers are perfectly sized. It is convenient to first make the inner finger, insert it into the hole for the outer finger and then tie it.

Proceed with your finger like this: string the loops set aside on the pin onto the knitting needle; add the same number of air loops and a couple of side loops. Distribute them evenly on three working needles and make circular rows to the middle of the nail. When knitting the top, cast off one loop in each row until only a couple of loops remain on the knitting needles. Tighten the toe with thread.

Perform the second, right, double mitten in the same manner. When finished, carefully insert the inner mitten into the outer one, carefully straightening out all the folds. For ease of use (so that the lining part does not slip out of the front part every now and then), make a couple of invisible stitches on the tips of the fingers and the toe of the product, fixing the parts.

Knit mittens with knitting needles to keep your hands warm even in the most severe frost!

Mittens are the most practical and convenient accessory for cold winters. Today you can buy mittens of different models on the market, but it is more pleasant to wear if you knit them yourself.

If you learn how to knit clothes, then you can create entire sets for winter - a hat, scarf or snood and mittens. These things complement each other perfectly if they are created in the same style using the same pattern.
To learn how to knit beautiful mittens, you must first create a simple model of mittens - with a simple pattern and without a seam.
Based on the skill of knitting such accessories, you can knit any warm items of clothing for your husband and children.

Every woman should know how to knit mittens, just like woolen socks. Let's look at how to create simple mittens for women and men using knitting needles without a seam.

Diagram and description:

Such a product can be plain, or you can add a thread of a different color to the elastic or stockinette stitch. The knitting pattern for such mittens is simple: 2x2 elastic on the wrist, the rest is stockinette stitch.

For the knitting process, prepare wool yarn- 70 grams and 5 short needles No. 3.
For a wrist girth of approximately 20 cm, you need to cast on 36 loops(9 loops on each knitting needle).
Knit the right mitten first. Mentally, number the knitting needles for yourself: on the 1st and 2nd knitting needles there are loops of the lower part of the product (palm), on the 3rd and 4th knitting needles - the upper ones.
First tie a 2x2 elastic band 7 cm high.
Then knit in the round facial loops to the beginning of the thumb - 7 cm.

We continue the steps:

Knit the thumb on the right part on the first needle, and for the left - on the second knitting needle. So, knit the first loop of the first knitting needle with regular stockinette stitch, and remove the remaining 8 stitches with a safety pin and fasten it.
Then cast on 8 yarn over stitches on the same needle. and knit the last 9th stitch in stockinette stitch. The mitten had a hole for the thumb.
Now knit to the nail of the little finger - 8 cm.
Toe mittens knitted with decreasing stitches. On the 1st and 3rd needles, knit the first two loops together behind the back wall. Pre-turn the first loop. On other knitting needles, knit two loops together at the end behind the front wall.
Knit like this until there are 2 loops left on each knitting needle.. Tighten the loops and fasten from the inside out.
Thumb knitting- remove the pin and insert one knitting needle in place of this pin, and thread the second one on the opposite side. It turned out 7 loops on the bottom knitting needle and 6 loops on the top.
Distribute stitches onto 4 needles: three will have 4 loops, and one will have 3 plus one loop pulled out from the side edge.
Knit your finger in a circle to the beginning of the nail. Then start decreasing.
Decrease on the toe is done as on the toe. When there is one loop left on each knitting needle, pull the loops and fasten from the wrong side.
Knit the left mitten similarly to the right one, but in a mirror image.

If you have mastered the technique of knitting with stockinette stitch, then you should start knitting openwork patterns. Mittens using this pattern look original and stylish.

Knit such openwork mittens with knitting needles, it will turn out interesting, and your hands in such an accessory will be feminine and beautiful.

Pattern diagrams with descriptions:

Cast on 44 stitches - 11 stitches on each needle. Tie a 2x2 elastic band.
Knit the first row with knit stitches.
On the next row, decrease 2 stitches together. Do this on each knitting needle.
Two knitting needles - stockinette stitch. Start knitting the other two knitting needles: purl, the rest knit, the last one - purl.
Again, knit stitches on two needles.
One purl and 6 knits, yarn over, knit, yarn over, slip one loop, remove 2 loops to the left side. Pass the next loop through the loop you removed and pull through it. Next, knit to the end of the needle.
Two knitting needles again in stockinette stitch.
Purl loop, 7 knit stitches, yarn over, knit stitch, yarn over, knit stitch, place the loop on the right needle and knit two stitches down. Pull the loop that was crossed over through the next loop. Then knit to the end of the needle.
Again 2 knitting needles.
Purlwise, place 3 stitches on a free needle and leave to work. Knit three, then transfer stitches from the auxiliary needle and knit in stockinette stitch. Knit two stitches, yarn over, knit stitch, yarn over, knit 2, slip 1 stitch onto a working needle, decrease two stitches. Pull out the thrown loop, knit 2, purl.
Two knitting needles in stockinette stitch.
Wrong side, 9 knit stitches, yarn over, knit stitch, yarn over. 3 knits, 3 knits. Cross the loop and 2 together. Pull the loop through, wrong side out. Rapport is ready. Continue this way until the toe of the mitten.

Watch the video for details on knitting this pattern. The craftswoman made double mittens with a knitted lining.

Video: Knitting Double mittens - Openwork leaves with braids. Part 1

Video: Knitting Double mittens - Openwork leaves with braids. Part 2

Video: Knitting Double mittens - Openwork leaves with braids. Part 3

Video: Knitting Double mittens - Openwork leaves with braids. Part 4

Video: Knitting Double mittens - Openwork leaves with braids. Part 5

Video: Knitting Double mittens - Openwork leaves with braids. Part 6

Video: Knitting Double mittens - Openwork leaves with braids. End.

Here are a few more openwork patterns for knitting mittens:

You can knit mittens and a shawl with this pattern to create an interesting set.

An original pattern that is easy to knit. Leaves and cones will perfectly decorate your mittens.

Beautiful diamonds stacked on top of each other will look great on the top of the mitten.

Mittens for lovers are a stylish accessory that symbolizes the warmth of feelings and unity. In such mittens it is pleasant to feel the warmth of a loved one while walking together in severe frost.

Knit mittens for lovers with knitting needles with a white heart on a red background, or vice versa, with a red heart on a white background. In addition, you can make a common mitten so that when walking along the city streets, you can always hold hands and bask in each other’s warmth.

Diagram describing a common mitten:

The photo shows that the elastic band of the mitten for each hand is knitted separately. Knit 7 cm with a 2x2 pattern - 2 pieces. Cast on 16 stitches on each needle. We will knit with two knitting needles.
Now connect two elastic bands on circular knitting needles.

Let's continue:

Knit in stockinette stitch in the round. There is no need for a hole for fingers on such mittens. Therefore, knit 7-8 cm before starting to create the heart.
Knit the heart according to the pattern, first making 6 loops in the middle of the knitting on one side, with white thread, through 2 loops.
In the next row there will already be 7 loops with a white thread through one red thread. Next, continue according to the pattern, first knitting the loops with white thread, then decreasing the white color until one loop remains.
Tie the toe of the mitten as described above and when 2 loops remain, tighten them and secure them on the wrong side.

Here are a few more photos of how you can knit mittens for lovers:

The pearl pattern is often used for knitting. Even a novice needlewoman can knit mittens with this pattern, as it is simple.

How to knit women's mittens with knitting needles with a pearl pattern? Scheme:

Description:

1st row alternates 1 knit stitch, 1 knit stitch.
2nd row - again alternate 1 purl and 1 knit, but knit a purl over the knit stitch of the previous row, and a knit stitch over the purl.
Then repeat the 1st and 2nd row until the end of knitting.

Double mittens are convenient to wear in cold weather or when you want to play in the snow, especially for children. These mittens will not get wet quickly, and your hands will always be warm.

How to knit winter women's and men's double mittens with knitting needles? Some tips:

If knitting is still difficult for you, then knit the inner and outer mittens separately.
First knit the inner mitten. Then create the rib of the outer mitten and stockinette stitch to the base of the thumb. Pull the outer mitten over the inner one, straighten your finger so that it is on the outside and start tying it - it will be more convenient.
To prevent the lower part of the mitten from slipping out, make a couple of stitches in several places of knitting and secure the parts.
To knit the lower part of the mittens, use thin yarn, and for the upper part, use thick woolen thread. As a result, the mittens will turn out warm and beautiful.

Tip: You can link two mittens separately and then insert one into the other, connecting the bottom of the elastic using a regular needle and thread or crocheting the edges. You can also knit in one piece, and then insert one part into the other. A simple fold is formed exactly in the center of the knitted elastic band.

A classic of the genre - jacquard mittens for winter in Russia. The knitting is double and dense, thanks to the interlacing of threads of different colors. The product will be warm, and your hands in such mittens will never freeze.

How to knit jacquard women's mittens? Scheme:

Beautiful and very stylish pattern. The diagram shows all the colors of the threads used.

These mittens are knitted from only two colors of yarn, but they look so interesting.

Jacquard pattern "Owl" - stylish and fashionable.

Jacquard pattern with deer. Only a true needlewoman can knit mittens with such an ornament.

Mittens with arans look luxurious. Products with this pattern are knitted for both adults and children. They turn out warm and beautiful.

How to knit women's long mittens with diamonds and arans using knitting needles? Scheme:

Important: Manizkas, snoods and hats turn out beautifully with this pattern. Therefore, you can knit a whole set - elegant and stylish.

You can knit warm down mittens from mohair. You can use any pattern. “Braids”, “Aranas” and others are suitable. Here are approximate patterns for knitting mohair mittens:

You just want to put on mittens with snowflakes and go for a walk in the cold, brushing snow off the branches of trees and bushes. Knitting such mittens is simple: cast on 44 loops, distribute on 4 knitting needles, knit a 2x2 (7 cm) elastic band and 7 cm in stockinette stitch. Next, leave a hole for the finger, as described above, and begin knitting the snowflake itself.

Below is a diagram and description of how to knit women's New Year's mittens with a snowflake. This pattern is also called “Norwegian”:

The elegance of the hand, the uniqueness of the image, the delicate style - all this is emphasized by the “Princess” mittens. An interesting pattern reminiscent of arans will make the products original and beautiful.

So, let's learn how to knit “Princess” mittens. Diagram and description:

Mittens of the “Princess” model can be knitted with different patterns. For example, the drawing “Owls”.

The pattern with plaits looks beautiful on the mittens. Here is his knitting pattern:

A deer, like a snowflake, is a symbol of winter and the New Year. Therefore, for knitting sweaters, socks and mittens, a pattern depicting this animal is used.

How to knit men's and women's mittens with deer with knitting needles? Schemes, description:

Here is another pattern for knitting a deer on mittens.

Tip: You can come up with your own deer, draw a diagram yourself and knit mittens using it. The result is a unique and original accessory.

The strands on knitted items are intertwined in a chic and unusual way. Mittens with such a pattern will definitely attract attention. This accessory will add individuality and originality to your look.

Mittens with strands are easy to knit with knitting needles. Below is a diagram according to which you can create the outer part of the mitten on two knitting needles. On the other two knitting needles, the inner part of the product is knitted in stockinette stitch.

It is better to see clearly how to knit such patterns. The video explains in detail how to create an interesting accessory - mittens with cords.

Video: Knitting mittens with strands Part 2 Basic pattern.

Transformable mittens are convenient because when necessary, you can open your fingers without removing the product itself from your hand. These gloves make it convenient to use a mobile phone in the cold. It is also comfortable to work, for example, for trade workers if their activities take place on the street. When you need to accept and count money for a purchase, just remove the valve from the mitten and your fingers will be free.

Tip: Transformable mittens for men and women without fingers with a folding top are easy to knit. For a woman, you can take yarn in delicate shades: beige, white, pink, and for a man - blue, black, brown.

Diagram and description:

Knit these mittens using regular stockinette stitch. Elastic according to the pattern 1x1 or 2x2. Below is a knitting pattern for transformable mittens.

Description of work:

The Braided pattern looks unusual. If you knit mittens using “Braid”, you will get a stylish accessory. This pattern is easy to knit - repeat repeating from the 9th row.

How to knit braided mittens with knitting needles? Scheme:

Description of knitting for this pattern:

Stages of work:

First, knit 7 cm of elastic, casting on 36 loops and distributing them onto 4 knitting needles.
Then knit using regular stockinette stitch on two needles, and the Braided pattern on the other two needles.
Leave a hole for the toe and knit until the beginning of the toe.
Now start decreasing stitches by 2 on each needle: on the first two knitting needles first, and on the other two at the end of knitting.
When there is 1 loop left on each knitting needle, pull them off and fasten them from the inside out.

Norwegian patterns are winter, trees, deer and snowflakes. Even if you knit only a snowflake, it will already be considered a pattern in the Norwegian or Scandinavian style. On the mittens you can create deer, nature or snowflakes separately, or combine them in one pattern. There are no limits to imagination!

How to knit mittens “Norwegian patterns”? Diagram with description:

Important: When knitting such an ornament, it is important to be able to pull the thread, because you need to constantly change yarn from one color to another. Monitor the quality of the drawing so that the thread tension is uniform and the pattern does not lose its shape.

The pulling process is performed as follows: straighten the knitted loops on the right knitting needle, pull the thread along them, and hold the thread with the index finger of your right hand, pressing it against the last knitted loop. On the wrong side, it is more convenient to press the thread with the thumb of your right hand.

Tip: On the right side, knit with knit stitches and pull the thread of the unused color so that it remains under the right needle. On the wrong side, knit with purl stitches and with your left hand, pull the other thread in front of the work and under the right needle. On the wrong side, the threads are pulled in front of the loops.

If you have learned how to thread a thread of a different color, then you can start knitting Norwegian patterns using any of the patterns. One cell in the diagram is one loop of a certain color.

Video: Knitting (mittens with “Norwegian pattern”)

This type of knitting can be done without broaches, but the fabric will be thinner than with broaches. Watch the video on how to knit jacquard without broaches.

Video: The simplest way to knit jacquard without broaches

How to knit mittens “Braid with shadow”: description

Look how original these mittens look. Unusual, and few women knit this way. Make these mittens with your own hands and surprise your friends and family.

Pattern for knitting an Indian wedge for mittens:

Knit the back side of the mitten as usual - with any pattern or just with knit stitches. On the palm: 1st row- Knit 15, from the 16th loop knit 2 on the front and back walls, knit 4.
2nd row- Knit 15, from the 16th loop knit 2 on the front and back walls, knit 5.
Knit further 15 rows according to this pattern with adding loops to the palm in each row. As a result, there should be 15+20 loops on the first two needles.
In the 16th row remove the finger loops onto the thread, close the knitting in a circle and continue knitting until the required length of the mitten.

You have already knitted mittens in different patterns, but you want something unusual and original. Knit mittens from thick yarn. It will turn out very interesting, and the products will be warm and comfortable.

How to knit warm women's and men's mittens from thick yarn? To knit mittens from this yarn, cast on half as many stitches as to knit mittens from thin threads. But in order not to make a mistake with the number of loops, you need to make some calculations:

Knit with a pattern of 10 cm thick yarn and calculate how many loops you have in 1 cm of knitting.
Now you know how many stitches to cast on for one mitten - 18-20 or a little more.

Important: Knit mittens from thick yarn in simple patterns - knit or purl stitch, tangle stitch, and so on.

If you know how to not only knit, but also embroider, then you can create beautiful mittens. Knit mittens in one color and make beautiful embroidery on the back.

Photo of mittens knitted with embroidery:

Knitted mittens with delicate embroidery: photo

Set - hat, snood and mittens knitted: photo of models

Knit a set for yourself, your child or your husband - a hat, snood and mittens. It will decorate any image, and things made by the hands of a loved one will warm you in severe frosts.

Set - hat, snood and mittens knitted - photo of models:

Beautiful products associated with the use of Arana and Braid patterns.

Set - hat, snood and mittens knitted in pink: photo of models

A dark set created using the Braid with Shadow pattern. It will look great with a coat or jacket in a contrasting color.

Set - hat, snood and mittens knitted with an interesting pattern: photos of models

And again the green tint is the color of the Christmas tree. Aranas and braids decorate the hat, mittens and snood.

Green set - hat, snood and mittens knitted: photo of models

A gray set, but not at all boring, and even very stylish and interesting.

Gray set - hat, snood and mittens knitted: photo of models

And again the “Braids” pattern, but the set is already crocheted in beige. Classics always decorate and add originality to the image.

Set in beige color - hat, snood and mittens knitted: photo of models

Knit things with your own hands. Make your family and friends happy. If you knit a set, it can be an excellent gift, for example, for the New Year.

Video: KNOWN MITTENS. CHILDREN'S MITTENS FOR 2 YEARS OF AGE. HOW TO KNIT MITTENS OF ANY SIZE?

Any woman who knows how to knit will probably tell you how unique double mittens are. And this is not surprising, because in harsh winter weather, few mittens or gloves can protect your hands from the cold.

Although you can find a lot of insulated winter accessories in stores, most often they are either nondescript or similar to each other, so needlewomen have no choice but to knit mittens themselves. The advantages of mittens knitted with knitting needles are obvious: the needlewoman herself can choose patterns, threads and accessories to knit not only a warm and reliable, but also a unique thing.

A simple way to knit double mittens

Many women, whose knitting experience is relatively small, are sure that not everyone can knit double mittens. Two-layer products are complex and beginners should not attempt this. In fact, this is not entirely true: many knitted double mittens can indeed be complex, especially if they have complex patterns or entire appliqués. But there are also simplified options that even novice needlewomen can handle. Let's take a step-by-step look at one of these methods, created specifically for beginners.

We begin to knit a regular mitten with an English elastic band. For this we need yarn of medium thickness. You can even take threads from unraveled items: the main thing is that they are in good condition. Also, there will be nothing wrong with choosing thin yarn for your future product - double mittens will always be warmer than regular ones.
We take the thread and fix it on the inside of the product - where the elastic usually ends, after which we pull out the loops using a hook. Now we need toe knitting needles on which to put the pulled out loops.
The number of loops is always different: it mainly depends on the diameter of the knitting needles, the ornament or the thickness of the threads. Therefore, when all the loops are cast on toe knitting needles, we measure approximately 50 cm from the thread and cut off the rest.
Now we need to pull the thread to the front side and connect it with the yarn from the ball. Someone ties a knot, someone winds the threads to each other using sewing threads - there are a lot of ways, but the main thing is to remain securely connected.
Using sock knitting needles, we begin to knit the outer mitten. You should always ensure that the thumb level on both products is at the same height.

You should not immediately try to knit items of advanced complexity - start with simple ones and over time you will be able to easily knit even the most complex items, and knitting will bring you pleasure.

If you don’t have the right quality yarn on hand, then don’t worry: even yarn whose quality leaves much to be desired can be quite suitable for an inner mitten. But, before you knit the outer mitten, remember that in this case it should be knitted quite tightly.
There is also a method when the inner mitten is knitted warmly and tightly, and thin or openwork threads are used for the outer one. Usually, in this case, a “translucent” ornament is knitted on the outer mitten. Very often the top layer is knitted with either a lighter yarn or a darker yarn than the inner fabric.
Patterns through which the inner mitten is visible are most often knitted with two knitting needles, but it will be possible to switch to two knitting needles only when the first few rows are knitted with several knitting needles. Usually the fabric is sewn on the side (but not on the thumb side) using knitted seams.
Despite the thickness of the outer mitten, its thumb will in any case need to be knitted in stockinette stitch with five knitting needles. At the end of knitting, many women simply tuck the inner layer of the mitten into the outer one, but many do it differently: they simply tie the wrong side of the product and find this method much more convenient than the traditional one.
Before you start knitting the outer layer of the mitten, you need to remember that it should be 2-3 rows larger than the inner one. Double-layer mittens are always warmer than single-layer ones.
It is recommended to wash knitted mittens by hand in warm water - this method will give the desired shape to the product: it will straighten and compress the fabrics where necessary.

On our website you will find even more patterns for knitting double mittens.

Video about knitting mittens:

Double mittens with spikelet

With the onset of frosty and cold days, you want to insulate yourself as much as possible: put on warm clothes, don’t forget about a hat and scarf, hide your palms in mittens or mittens, gloves. You can knit unusual mittens with your own hands; the patterns and descriptions of their manufacture are simple and accessible, so even inexperienced knitters can cope with this task.

With the onset of frosty and cold days, you want to insulate yourself as much as possible.

Knitting mittens for those craftswomen who have been holding knitting needles in their hands for a long time is a familiar and ordinary thing: most of them do such work mechanically, without thinking about the sequence of actions. For beginners in knitting, such work will seem a little difficult, but exciting and interesting. Schemes and descriptions of the process of how to knit a beautifully simple product will help you do the job correctly, efficiently and in an original way.

In order for the mittens to fit perfectly on the palm, without squeezing your fingers or hand, you should start by determining the size. To do this, draw a brush onto the paper along the outer contour and calculate the size of the product, as well as how many loops will need to be cast on for a certain size of the product.
Cast on 48 stitches on two knitting needles at the same time, then carefully remove one knitting needle and distribute the entire amount into 4 equal parts (12 loops each) onto different knitting needles. A marker is attached to the working loop so as not to subsequently lose the beginning of the circular row.
Further knitting of the cuff with knitting needles is done with an elastic band, after which a few centimeters of stockinette stitch will fit.
8 loops from the first knitting needle are removed with a safety pin, and the same number of loops is cast on to continue working. Knit in satin stitch until the end of the little finger, after which they begin to decrease the loops evenly, the last 8 loops are knitted loop into loop.
To the 8 previously removed loops, add the same number of additional ones and distribute them onto 4 knitting needles. The thumb is knitted from the collected quantity, the last pair of stitches is knitted together with the front one.

Knitting mittens for those craftswomen who have been holding knitting needles in their hands for a long time is a familiar and ordinary thing.

The instructions for making mittens for inexperienced needlewomen include making the product using stockinette stitch, since these are the simplest mittens, which can then be painted at your discretion.

Beautiful knitted mittens with a pattern

Products knitted with a beautiful pattern look original. Such mittens do not need to be further decorated, as they themselves look elegant and exclusive. Beautiful knitting of such a product is not difficult in itself; it is important to follow the step-by-step instructions.

To start working, cast on 40 loops, distribute them evenly onto 4 knitting needles and close them in a circle.
Next we knit according to the pattern, openwork leaves will appear. On row 41, 6 stitches are lowered onto a safety pin for the thumb hole and knitting continues, casting on five stitches for balance.
Having knitted all the rows according to the pattern, close the work and proceed to knitting the thumb, distributing 12 loops onto 4 knitting needles. Knit 15 rows in stockinette stitch, then knit 2 loops simultaneously on each needle until the end.

The product for the second hand is knitted similarly, in a symmetrical reflection.

Knitted mittens with braids: step-by-step instructions

Warm and original mittens with a braid pattern can be knitted by following simple instructions and without deviating from the standard pattern. You can make this product from thick, coarse yarn, or you can make the product thin and light.

Cast on 52 stitches on a pair of knitting needles and work with a double elastic band for 20 rows in the round. In the last row two loops are added.
Starting from the 10th row, knit the finger gradually until 20 extra loops are formed. They are put on a pin and knitting continues according to the pattern.
To knit a finger, knit the required length, then connect 1 and 2 together simultaneously using knit stitch, in the last row there are 2 knit stitches. At the end, tighten the remaining loops.

The right mitten is knitted in a symmetrical manner similar to the left one.

Knitted mittens with ornaments

You can make men's or women's mittens with an ornament with your own hands from any yarn, but it is advisable to use white or gray threads for the base. Men will also prefer a black base, diluted with gray ornaments.

The pattern can be made with any threads of a contrasting color.

Cast on 48 stitches per pair of knitting needles, then distribute them onto 3 knitting needles (16 stitches each).
Knit 4 rows with a double elastic band, then introduce a colored thread and knit a couple of rows. This alternation is repeated again. After which the cuff is ready.
Knit four rows with a single-color thread using the stockinette stitch method and move on to the ornament.
For decoration, the loops are redistributed in half and 24 loops are knitted according to the pattern. Having reached the second mark of the diagram, the number of loops begins to be reduced by 2 on both sides. This way all the loops are gradually closed.
They return to knitting the fingers, which is carried out according to the standard pattern.

If you strictly follow the pattern of the ornament, the mittens will turn out cool and very creative.

Children's ideas for winter mittens

For adults and children's winter mittens, the idea of owl mittens is considered quite a fashionable modern trend. They can be made long or short, in the form of tunnels or solid, plain or two-color.

For such an accessory for a girl, you should prepare in advance not only knitting needles and yarn, but also beads for the owls, and jewelry that the little princess will prefer.

32 loops are cast on the knitting needles, which are subsequently distributed onto 4 knitting needles.
The first 10 rows are knitted with an elastic band using double loops, the 11th row is knitted in stockinette stitch.
In the 12th row, add a pair of loops from broaches, the next rows up to 18 inclusive are performed in knitting.
The bird is knitted from the 19th row: on the first two knitting needles, on the 3rd and 4th - 4 knits on 6 purls and 6 knits on 4 purls.
21st row: on 1 knitting needle all knit stitches, on 2 knitting needles slip 2 knit stitches, on a pin slip 6 thumb loops, on the third and fourth knitting needles - 4 knit stitches, 2 purl stitches, 4 knit stitches.
From rows 22 to 24, the algorithm is repeated, but without removing the thumb loops.
From 25 to 31 rows are knitted according to the following principle: knit on needles 1 and 2, knit 4 on needles 3 and 4, purl 2, knit 4.
From rows 31 to 41, the first and second rows always have knit stitches, the third row has 4 purl stitches and 6 knit stitches, and the fourth row has 6 purl stitches and 4 knit stitches.

After the 38th row, the loops are decreased and 2 loops are knitted from each end at a time. The loops are reduced to 8 pieces, which are then tightened with a special needle. After finishing, the finger is knitted in the standard way. To complete the work, small beads are sewn onto the eyes for the birds.

Classic mittens knitted (video)

Mittens with knitting patterns (video)

Funny mittens will delight lovers on Valentine's Day, and little children will wear them with pleasure. The master class on making such fun winter accessories for women and children includes other options for knitting attractive characters.