The head of a deer from paper scheme print a4. Paper deer craft (45 ideas for kids). paper folding

All photos from the article

For a long time it was customary to decorate the interior of the premises with hunting trophies. After a successful hunt, a stuffed animal was made with their own hands, which was hung on the wall and for a long time testified to the skill, accuracy and luck of the shooter.

Today, the situation has changed radically, since many animals are under state protection and their shooting is prohibited. Of course, a stuffed animal of one or another part of a dead animal can be bought, but the price of such a trophy will be high.

In this article, we offer an alternative to buying expensive stuffed animals, because a deer head made of plywood will look much more original and modern than a stuffed animal stuffed with straw. In addition, you can be proud that no animals were harmed while decorating the interior of your living room.

We recall school labor lessons or what can be made from plywood

To many readers of this article, school years I had to attend labor lessons or needlework circles and something. If you have experience in such activities, then you can easily cope with those works, which we will discuss below.

If there is no experience with a jigsaw, let's explain that a manual jigsaw is a tool designed for delicate cutting of thin lumber. Structurally, it is a metal frame with a handle, and a narrow fine-toothed cloth is clamped between the ends of the frame.

The advantage of a narrow blade is the ability to cut lumber both starting from the edge of the sheet and indented from the edge. In this case, a through hole is drilled in the sheet, into which the canvas is pushed through. As a result, it is possible to make complex figures, for example, the head of a deer with an eye, to which there is no cut from the edge of the sculpture.

If you have a jigsaw and drawings of a rhino head made of plywood, you can easily translate the design idea into reality with your own hands.

Below we will bring to your attention a few instructions from which you can choose the craft that will fit into the interior of your living room.

Assembly instructions

Perhaps, let's start with the most common hunting trophy and consider drawings of a plywood deer head. Making a deer, as well as other animals, is the creation of a kind of 3D puzzle. That is, a certain number of parts are made from lumber, which are assembled into a single structure.

Do-it-yourself New Year's deer - this is what you can do to decorate during the main winter holiday. Such a craft will definitely not go unnoticed, because a home-made deer always looks creative and beautiful.

Below will be described step by step how to create various New Year's crafts and decorate the holiday with them. The deer stencil is made of cardboard, but if it is not there, then you can use plain paper. The paper will make a large Christmas deer, which can be hung next to the garlands.

So, the scheme of work is as follows:

1. In creating any stencil, it is important to draw the correct pattern. For those who are doing this for the first time, it is recommended to choose a simple drawing, since elements such as, say, the head or horns of an animal will be quite difficult to draw. So, after the sketch of the future craft is selected, you can start creating the stencil itself.
2. When drawing, it is recommended to use a pencil, as it can be erased at any time. When a person is satisfied with his graphic drawing, he can use a marker to trace its outline. Alternatively, you can use a ready-made template by printing it from the Internet. Or another way: you can take a stamp from a seal. However, you need to take into account the fact that usually such seals are small, so if you want to create a large stencil, it is better to draw the outline yourself.
3. Now you need to decide what kind of paper stencil will be, single-layer or multi-layer. If the future craft is black and white, then it is recommended to make one layer. At the toy factory, stencils are made multi-layered, because this way the craft will be stronger. You can also get creative and create such crafts from foam.
4. The drawn and painted image on paper (cardboard) must be copied onto thin tracing paper. It is important to ensure that all its details are well reflected on the tracing paper. Now you need to draw the outline of the drawing again. Copy paper can be used instead of tracing paper.
5. At the last stage, you need to use a penknife in order to cut out the stencil. This should be done strictly along the contour.

Tip: Stencil Christmas decorations are made of plastic. A hole is made at their top through which the thread is threaded. The toy can be hung on a Christmas tree.

Gallery: do-it-yourself Christmas deer (25 photos)

New Year's deer: ideas (video)

Do-it-yourself paper deer head: how to make?

A large paper deer will certainly decorate the New Year!

You need to do it like this:

1. First you need to collect everything you need: colored and white paper, scissors, a ruler, a sharp device, such as scissors or a knitting needle, adhesive tape and glue.
2. To create such a craft, you will need about 15 sheets of paper.
3. The work begins with the selection beautiful drawings. It must be drawn on paper and cut out. Now all the images need to be bent, then to be glued together.
4. To push the groove, use a ruler. It must be applied to the bend line and drawn along it with a sharp object.
5. Glue the parts carefully so that the glue does not stain the paper.
6. In the place of the neck of the animal, you need to fix the thread or rope. You can do this with a small piece of tape.

How to make a wire deer: diagram

To get a beautiful Christmas wire toy, you need to show creativity and sophistication.

So the action plan is:

1. First, it is important to decide what size the deer will be and what it is for. If there is a desire to make a New Year's toy, it is enough to take one sheet of A4 paper to create a layout. But you can also make a large deer out of wire, which you can put on the street and decorate with a garland. It will look great! The choice remains with the creator, especially since the scheme of work is the same.
2. When the size has been chosen, you can start creating the layout. On a piece of paper, you need to draw the profile of the animal, the horns are drawn on separate sheet. This is necessary for wire modeling.
3. Now the wire needs to be accurately modeled according to the drawing. You can apply it to paper to prevent deviations. The wire must be twisted. Two identical wire simulations should be made.
4. Now both simulations should be fastened together. It is recommended to do this in the tail area by twisting the wire. As for other parts of the deer, to fasten them, you need to cut off a small piece of wire and use it as a hook for two parts. Thus, there will be a distance between two wire models and the toy will not be flat.
5. The horns of the animal are wrapped with wire to the head, after which the whole deer must be wrapped with it. It is recommended to be careful circular motions given material.
6. If you want to give the craft an LED effect, you can attach a garland to it. You will get a beautiful glowing wire deer.

Christmas reindeer made of cardboard: how to make?

1. First you need to draw a layout of the future deer on cardboard. The head of this beast, made of this material, so the method for creating it will be described below.
2. It is recommended to print the templates on the printer first. In every detail, it is important to make a strip in the center - this is the future incision for fastening.
3. Each piece of paper must be attached to the cardboard with double-sided tape. It is not recommended to use glue for this.
4. Then each detail should be carefully cut with scissors along the contour.
5. After that, you can make cuts in them. For convenience, it is better to use a knife.

When the slots are ready, you can start assembling the deer. Details are attached one to one.

Deer costume: simple pattern

In needlework, you can stick to fashion trends, or you can be creative and create a toy that no one else has! New Year's deer is, of course, great. However, even it can be brought to perfection by decorating it with improvised materials. Below will be described how to make holiday costume for this Christmas toy.

As “clothing” for a deer toy, you can use cotton wool, packages from lollipops, Christmas tree rain, knitting yarn, and so on. There are many ideas - there would be a desire!

1. To do this, you need glue, cotton wool and a multi-colored Christmas tree rain. You can also use glitter.
2. First you need to tear the cotton wool into small pieces so that it resembles snow. Then, using glue, you need to fasten it with sparkles and rain. Do not pour too much glue, as it will leave ugly marks when it dries.
3. The sticky "mixture" should be mixed well and applied to the toy. It turns out very beautiful craft!

And if you want to make such a costume for small child, then you can go the simplest way. A brown jumpsuit will serve as the body of a deer, but the horns can be made from gloves into which you need to put cotton wool. Gloves are attached to the hat with thread or a stapler.

How to make a New Year's deer with your own hands from foam?

Styrofoam makes a very beautiful winter deer! Another advantage of this way of creating a toy is its simplicity.

Here is the plan to follow:

1. The foam to create a deer must be clean, otherwise the toy will look ugly.
2. Before proceeding with the craft itself, you need to outline an approximate work plan: the size of the craft, its thickness, and so on. Then you need to take several pieces of thin foam and draw a model of the future toy on each of them.
3. After that, the layout is cut with a knife and the two parts are glued together.
4. To make the toy beautiful, it must be decorated with sequins and cotton wool.
5. With the help of red knitting yarn, you can make a scarf and a hat for a deer.

Also, as an alternative, you can mold a deer from plasticine, chop the foam and sprinkle it on the animal. It is necessary to use white plasticine, because by the new year you need to make winter deer. So the toy will turn out even more beautiful! If you make a small craft, then you can put it on a stick right in the Olivier. This will give the festive table an atmosphere of creativity.

How to make a deer from cotton wool?

1. First you need to decide on the size of the future toy. For those who have never done such crafts, it is better to start from the very easy way. So, it is necessary to make a "skeleton" of the future toy. It is made from wire.
2. After that, you need to deal with the main raw material for crafts - cotton wool. It should be torn into small pieces and crumpled into round balls. Each ball of cotton should be attached to the wire with tape. It should be cut into small strips so that it does not catch the eye.
3. For the horns you need to make separate balls small size. So the craft will look beautiful and neat. To make the toy colorful, several cotton balls can be painted red and hooked onto deer antlers, alternating with white balls.

Origami: deer (video)

People say that the New Year is a magical celebration of the fulfillment of the most cherished desires. So why not give it magic that you can create with your own hands? A do-it-yourself New Year's deer is a great way to prove your love to your family, so it must become one of the main attributes of this celebration.

Since ancient times, men hunted, and the prey was used for various purposes. Some animals were eaten, some were skinned and laid out like a carpet, and the head of a deer was hung on the wall for beauty. You feel sorry for the poor animal, but do you want decoration in this style? Learn how to make paper deer!

Papier mache. Preparation

With this technique, you can create almost any shape. Therefore, it is worth contacting her with the question of making paper with your own hands. Materials:

• Newspapers.
• Adhesive tape.
• Scissors.
• Glue for papier-mâché (PVA).
• Dye.
• Thick cardboard (box).
• Wood base for wall mounting.

Papier-mache glue can be created independently. This should be done right before work. In a ratio of 1:5, take the sifted flour and water, respectively. Mix until lumps disappear. You can beat with a blender. Take three times as much water and boil it in a saucepan. Add flour mixture. Lower the temperature, stir the consistency for three minutes. Then add sugar. Let the glue cool, remove the emerging film.

Progress

When all the materials are prepared, you can start learning how to make a paper deer with your own hands.

You learned how to make a deer out of papier-mâché paper!

Made

There is a very simple way to get a paper deer. Print the template below in the size you need.

Cut out all the details and glue on thick cardboard. The main thing is to choose the right thickness in accordance with the dimensions of the product.

Decorate the workpiece in desired color and collect. Ready!

New Year card

A postcard will help to complement a gift for friends on the most long-awaited holiday of the year. How to make a Christmas deer out of paper? What do you need:

• Toy eyes.
• Red ribbon 1 cm wide.
• Red and brown cardboard.
• Pencil.
• Scissors.
• Glue.

Progress:

1. Bend a sheet of brown cardboard in half and draw the body of a deer. The tail should be on the fold. Cut out the drawing.
2. Make a nose out of red cardboard.
3. Glue on the toy eyes. You can make them yourself by cutting out the appropriate circles from white and black paper.
4. Create a ribbon bow and glue it around your neck.
5. Write a congratulation inside, and you can attach a tag with the main congratulation, such as "Happy New Year", or with the name of the recipient to the ribbon.

Delight loved ones with homemade cards!

Origami

How to make a paper origami deer:

1. Take a square piece of paper and fold it into a triangle.
2. Bend again, unbend. This was necessary to create a fold line.
3. Turn the top layer of the left side of the triangle into a rhombus. Turn over the sheet. Do the same with the other side.
4. Fold the side corners and the remaining upper triangle to the center. Unbend.
5. Pull the bottom corner and turn it into an elongated rhombus. Turn over the sheet.
6. Fold in upper part down, return to the original position.
7. Slightly obliquely from the center, fold up the bottom corners.
8. Bend the triangle down, fold a small part up and down again at the bottom. At the top, fold the triangle down.
9. Bend the corners protruding from the side down, then a small part up.
10. Cut the protruding triangle in half and do the same with it as in step 9.

Now you can easily create a deer in different techniques using paper!

Good afternoon, today I will talk about all the ways to make a paper deer with your own hands. If this New Year you decide to take on such a craft, here you will definitely find what you need. This article will provide material for educators kindergarten, will help parents make a deer craft for a school competition, I will also tell you how to arrange a gift in the spirit of a New Year's deer. ladies interesting master classes to create a voluminous deer from thick paper or not thick cardboard. You will also find simple drawings and diagrams for assembling a deer from thick cardboard packaging. And it will be clear and interesting.

Easy crafts with DEER

For children.

The most common crafts in kindergarten on New Year These are paper applications. This year you can make a New Year's deer with the children. Cut out separately the details of the body, horns, muzzle and nose, small elements of the eyes, spots and hooves. You can decorate a deer with a piece of textile ribbon or a thin New Year's garland.

Older children can do the same craft, but in a different incarnation. In the senior group of the kindergarten, children already own scissors and carefully cut out along the contour drawn by the teacher. Then they can be given cardboard boxes with the same silhouette of a deer. And the child himself will cut out a cardboard figure. All Christmas reindeer paper can be hung on a single ribbon - make a garland to decorate a kindergarten. You get a long team of deer flying forward. Behind you can stick Santa Claus's sleigh - you get a beautiful New Year's composition on the wall - for example, in the locker rooms, above the children's lockers.

You can come up with the configuration of the deer silhouette yourself. For example, execute it from rectangles. The children themselves will cut pieces for the body, head, long strips for the legs. Figured horns can be given already drawn - for cutting along the contour. The craft can be decorated with a snowball made of cotton wool and small snowflakes from a figured hole punch.

Young children can lay out a deer following the example of a teacher from small geometric shapes made of paper - squares, circles, stripes.

Ideas for deer appliqué can be found among New Year's pictures, drawings on children's T-shirts. You can draw funny cartoon deer yourself and in your own way. own sketch create beautiful bright applications paper deer.

You can also get creative with the task of creating an application and using colored paper but an ordinary newspaper. Children will be pleased to paint it later with watercolors, painting over the body and horns of the deer in the desired colors.

One and the same craft - you can embody in a variety of designs. Here is a deer with a head in the shape of a light bulb, where the antlers are made from carved silhouettes of a child's hand. Great and beautiful crafts for kindergarten.

You can make a craft with a three-dimensional effect - where the deer seems to lower its head, and the tip of its New Year's cap hangs down.

Improvised waste material - can become elements of children's crafts in the form of a deer. Cotton swabs turn into horns, a red round button or bottle cap can become a deer's nose.

Paper deer craft can be supplemented natural material, cones, flower seeds, coarse hemp rope. Any interesting texture will only enrich your creative work.

Instead of paper, you can use a new ornamental material - formiam. The craft is light and bright. Such a deer can be hung on a Christmas tree as a Christmas tree toy.

Postcards with deer

from paper and cardboard.

Greeting cards can also be decorated with paper deer appliqué. Works cut out of corrugated ribbed cardboard look very nice as in the photo below.

You can embroider a deer on a cardboard postcard with colored threads - woolen or floss in several additions. First, we draw sketches of the future picture on the postcard with weak pencil lines - then we make large stitches along the drawn lines.

And you can make an openwork MULTILAYER postcard, where you can add a lot of delicate transparent thinly cut elements. To make a postcard with a deer airy and voluminous, you need to put pieces of thick cardboard (from packing boxes) between the layers of cardboard silhouettes - then these silhouettes will hang over the background of the postcard - as if soaring in the air above it. A 3D effect is created.

You can insert elements of unexpected things into a postcard. For example, a red light bulb that lights up with a spark instead of a nose.

Or a candy can become a round nose of a deer made of paper - for example, a lollipop on a stick, or a round red candy. And then candy sticks with red and white stripes will become horns.

You can decorate a postcard with a deer with an application of dry oak leaves. They are very similar to the branched antlers of a deer. It turns out beautifully and original - in a sincere way.

Volumetric children's crafts

With a DEER made of paper.

From strips of colored paper, we can make a round ball. And decorate it like a deer toy. Such balls can be hung on a Christmas tree as christmas toys. In the New Year's articles on our website, we have already made such paper crafts for the New Year - in the form of Santa Claus, Snowman, Penguin, etc. in the article " Christmas crafts for kids 103 ideas, I told in detail how to glue such a ball of paper strips.

And here is another toy idea for Christmas tree in the form of a deer. The toy turns out to be three-layer, between each layer we lay beads, or a piece of a cocktail tube - so the layers do not stick together and the craft has volume.

And here's another great one voluminous craft for children at school or senior group kindergarten. The torso looks like an ordinary oval donut - we bend it in half and get a stable structure. Now it remains to glue the head with horns. Beautiful and simple craft, which is easy to do with your own hands for children.

Craft deer

Folding paper.

But a very simple and interesting deer craft as a result. It is better to use thick paper. Or thin cardboard.

First, we cut out such a module - with a long neck part. The module, as you noticed, is collapsible. The fold line goes along the ridge - the spine of the craft.

On the neck, we make lines with a pencil - in the area of ​​​​the base of the sheni, and in the area of ​​\u200b\u200bthe beginning of the head. We make folds and put the folds at the angle we need on the crease. If it is difficult to make a fold, you can first practice on a draft sheet, or make cuts in this place with scissors, then it will be more convenient to figure out exactly how to bend the module.

Craft DEER

From cardboard rolls.

And here is a craft that can be made from cardboard rolled up. We twist the horns from fluffy wire. We sculpt eyes and nose from plasticine or cut out from cardboard.

You can add round cutouts at the bottom in a cardboard twist (as in the photo below), this allows you to decorate the legs of our voluminous deer. And we also glue the head to the inside of the roll. We bend a piece of cardboard in half - one half will be the inner adhesive part, on the other we draw a deer's face - and glue it to the roll body.

It is possible to use sleeves from toilet paper- paint them with gouache in the desired color, or paste over with colored paper.

New Year's deer

from packaging cardboard.

Ordinary packaging corrugated cardboard (from boxes) can be used as an interesting craft material.

Cut out flat details - torso, horns, legs in the form of arches. And then in the torso make a SLOT UP (we insert the horns into it), and TWO SLOTS DOWN (we insert the legs into the bottom). As you can see, the craft is very simple. Slots need to be made a little fatter - so that a rather thick plane of cardboard fits in.

In this technique of planar modules that are inserted into the SLOTS, you can make a whole large winter or New Year's composition. Decorate your interior with it - place everything on the windowsill or on a table against the wall.

You can buy special children's corrugated cardboard for crafts. And make a paper deer using the TWIST technique, as in the photo below. We simply cut the corrugated cardboard into narrow strips and fold it into a round shape, or into the shape we need.

New Year's deer

for gift wrapping.

And here are examples of how a paper deer craft can serve as packaging for a New Year's padar or a souvenir.

YOU can assemble a box out of cardboard - in the form of a cone, and then decorate it with deer head applique, as in the photo below. The assembly diagram of the box-cone is inside the article Christmas trees made of paper, there we assemble a Christmas tree box in the form of a cone in the same way.

Your gift can be wrapped in an envelope self made, designed as a muzzle of a deer. Or use an ordinary brown shopping bag and turn it into a deer with cardboard antlers and a pom-pom nose.

The muzzle of a paper deer can be glued to a clothespin - and just fasten a regular paper bag, as in the photo below.

On either paper bag you can use any of the deer appliques suggested above. It's pretty simple and pretty too.

You can also turn any ready-made package into a deer. Take a tea box - cut off its top, glue it with brown paper - stick an application of deer hooves on the front wall, and on the back wall a cardboard application of a deer head, towering above the box - and we get an elegant way to give a gift.

These are the ideas of paper and cardboard deer crafts that I have collected today in this article. Now you can choose many options for your New Year's work with a smart festive deer. And that's not all ... because I'm preparing a new article, which will include ideas that do not fit here, DEER WITH YOUR HANDS (44 crafts for the New Year).

Olga Klishevskaya, especially for the site ""
If you like our site, you can support the enthusiasm of those who work for you.
Happy New Year to the author of this article, Olga Klishevskaya.

“I've always wanted a decorative deer head to hang on the wall. Such ornaments can be seen in fashion stores decor, but the cost of such cardboard crafts starts from 100 USD.

Not everyone wants to part with such an amount, especially given the fact that you can do it yourself.

Watch a master class on making a deer head from the most ordinary cardboard. The whole job took about 10 hours and not a penny of money. All material and tools were at hand at home.

cutting small parts a rather tedious process, so I recommend that you take breaks in your work and not rush. Be extremely careful when cutting cardboard. Perform all cutting actions away from you.

And so, first of all, you will need to choose the main material for your product. reconsider carton boxes available and choose the strongest and cleanest cardboard, or just take the available one. This article has several templates in good resolution. Take the one you like and print on the printer in the appropriate size.

From the tool you will need a wallpaper (stationery) knife, scissors, double-sided tape (you can also use one-sided tape)

Cut out all the elements of the templates from paper.

Place all the parts on the cardboard so that you make the best use of the usable area. paper patterns Attach to cardboard with double sided tape.

Make sure that at the bottom under the clipping is reliable protection, which prevents damage to the surface on which you work. It can be plywood or several pieces of thick cardboard.

After you have cut out the main contours, proceed to the slots.

After all the elements are ready, you can proceed with the assembly, according to the scheme.

You can attach the head to the wall by hanging it on a makeshift hook made from the “key” of a beer can (or cola), which can be glued to the base of the layout with hot glue or tape.

Here is the result! Maybe not very neat, but for the first time it's pretty decent.

But if you set a goal, then you can find decent cardboard and cut it out more accurately.

But such layouts can be made from 3mm plywood (template at the end of the post). Only in this case you can not do without a jigsaw and sandpaper. You can paint in any color and for decoration, the flight of fancy is not limited.